Woodpeckers StealthStop 1219mm/48″ Fence Kit – Left

The Woodpeckers StealthStop 1219mm/48″ Fence Kit is a micro-adjustable flip stop fence system that is designed to work within a 3/4″ x 3/8″ mitre track or channel. StealthStops glide up and down the track effortlessly and lock firmly with a simple twist of a hex key. When folded down, the stop is completely contained within the slot. Flip it out and it locks square to the track and rigidly in place. The micro-adjuster thumbwheel allows you to fine-tune the stop position with precise control.

You can mount a single track vertically or embed it into the surface of your table. The vertical mount is the easiest and the most familiar, it looks like an ordinary back fence. The installation brackets slide into the back of the track and then screw down to your work surface. The bracket is also a convenient storage point for the provided 1/8″ screwdriver-handled hex key.

For the horizontal flush mount, you can rout a 1/2″ deep groove in your work surface or for a simpler approach that doesn’t involve cutting your table, mount the track on top of the work surface and butt 1/2″ plywood up to both sides of the track, creating the same flush surface.

The main components of the StealthStop are injection-molded with glass-reinforced polycarbonate. All the internal components are either stainless or zinc-plated. The micro-adjust thumbwheel is turned from brass. It’s all low maintenance and rust-resistant.

Features

• Micro-adjustment brass thumbwheel for precise setting
• Flips out of the way when not in use
• Glass-reinforced polycarbonate body for longevity

Includes

• 1 x 1219mm/48″ Combo Track
• 5 x Mounting Brackets
• 2 x StealthStops
• 1 x Dual Scale (Metric/Imperial) Scale reading 0 on the right to 1219mm on the left
• 1 x 1/8″ Screwdriver-Handled Hex Key
• 1 x Mounting Hardware Pack