Tormek KJ-140 Wide Centering Knife Jig

The KJ-140 Wide Centering Knife Jig is a well-balanced jig providing extra stability when sharpening knives with long, flexible blades such as filleting knives. With the KJ-140 Wide Centering Knife Jig you achieve symmetrical sharpening with the same angle on both sides of the blade. No need to worry about the thickness and geometry of the knife blade, it will self-centre in the jig and give you the same result on both bevels. The longer clamp stabilises flexible knife blades to prevent them from flexing, so that you get the same angle and pressure over the entire bevel.

Features

• Centres long, flexible knife blades in the jig for optimal, symmetrical results.
• The 140mm (5-1/2″) wide clamp stabilizes flexible blades.
• Centres tapered knives and holds them firmly.
• An extra stop for tall knives, such as cleavers.
• Ability to shape a slightly convex edge with a movement between the two stops.
• Robust design – zinc-cast clamps and durable composite stops.
• Well-balanced – most of the weight is focused on the clamps, which provides a more balanced feel when grinding.
• Slides smoothly with low friction against the universal support.
• Works with both Tormek T-4 and Tormek T-8, as well as older models.

Please note: The KJ-140 Wide Centering Knife Jig cannot be used with the SVM-00 Small Knife Holder. The KJ-45 Centering Knife Jig is used instead.