Milescraft 1/4″ ShelfPinBit

This 1/4” ShelfPinBit™ is a self-centring bit that is pre-set to bore a consistent depth for perfect fitting shelf pins every time. No adjustments are necessary! The locating nose is 9.5mm in diameter and 6mm long to fit perfectly in the Milescraft CabinetMate.

Features

• Self-centring boring bits in 1/4” diameter
• Drill perfectly centred holes for shelf pins
• Spring-loaded HSS brad point drill bit with 1/4” hex drive drill
• Includes 1/8″ Allen key

For Use With

• Milescraft CabinetMate™

Please Note: Before you use the bit, you will want to fully tighten the set screw. Also, be sure that when loosening the set screw on the ShelfPinBit™, you do not loosen it too much, as the pressure from the spring will make the bit come apart.